SWISS CNC MACHINIST URGENT — 4 OPEN ROLES | LOCAL TO WEST CHESTER, PA ONLY share resume Michael@haavia.com CLIENT: ACERO PRECISION (confidential)
Location: West Chester, Pennsylvania (100% Onsite — LOCAL CANDIDATES ONLY — No relocation under any circumstances ROLE 1: SWISS CNC MACHINIST
Compensation: $22.00 - $30.00 per hour + Overtime
Shift: 1st, 2nd, and 3rd Shift Available
About the Role:
Client is seeking skilled SWISS CNC Machinists to join its growing precision manufacturing team producing tight-tolerance components in a highly regulated environment.
Key Responsibilities:
Operate SWISS CNC machines safely and efficiently
Monitor machine performance throughout production runs
Inspect machined parts to blueprint specifications
Utilize calipers, micrometers, gauges, and measuring equipment
Verify critical dimensions and tolerances
Make wear offsets and dimensional adjustments
Change tooling and monitor tool life
Troubleshoot minor machining issues
Complete inspection documentation
Required Qualifications:
Minimum 2 years of CNC machining experience
Blueprint reading ability required
Precision inspection experience required
Experience making offsets independently required
Tool change experience required
Strong attention to detail
Local to West Chester, PA — no relocation considered
ROLE 2: SWISS SETUP MACHINIST
Compensation: $27.00 - $35.00 per hour + Overtime
Shift: 1st, 2nd, and 3rd Shift Available
About the Role:
Client is seeking experienced SWISS Setup Machinists capable of independently setting up machines, performing first-piece inspections, verifying parts to print, troubleshooting machining issues, and supporting production teams. This is for machinists who can take ownership of complete setups from start to finish without supervision.
Key Responsibilities:
Independently set up Swiss CNC machines
Perform complete machine changeovers
Install tooling and fixtures, set work and tool offsets
Verify setup accuracy before production release
Run first-piece inspections and verify parts to blueprint
Approve jobs for production release
Troubleshoot setup and machining issues
Support operators throughout production
Read and interpret blueprints and perform inspections using precision measuring equipment
Required Qualifications:
Independent setup experience required — must be able to set up without supervision
First-piece inspection experience required
Blueprint reading ability required
Offset and tooling adjustment experience required
CNC machining background required
Precision measurement experience required
Local to West Chester, PA — no relocation considered
ROLE 3: MANUFACTURING ENGINEER TECHNICIAN (MET) - SWISS/CNC PROGRAMMER
Compensation: $95,000 - $120,000 annually or $35.00 - $45.00 per hour
Shift: 1st, 2nd, and 3rd Shift Available
About the Role:
NOT a programming-only role and NOT an engineering-only role.
Candidate must take a part from drawing or CAD model through programming, setup, prove-out, first article approval, and full production release.
Key Responsibilities:
Create CNC programs using CAD/CAM software
Develop machining strategies and convert drawings/models into production-ready programs
Select tooling and machining processes, optimize cycle times
Perform machine setups and run first articles
Prove out new programs, validate dimensions and tolerances
Troubleshoot machining issues and release jobs into production
Provide technical support to machinists
Support engineering changes and improve manufacturing processes
Required Qualifications:
CNC programming experience required
CAD/CAM experience required (Mazatrol, PartMaker, or similar)
Setup experience required — must be able to perform own setups
First article experience required
Blueprint reading required
Troubleshooting ability required
Local to West Chester, PA — no relocation considered
ROLE 4: QUALITY CONTROL MANAGER - MACHINE PARTS
Compensation: $80,000 - $110,000 per annum
Shift: 1st Shift
About the Role:
Client is seeking a hands-on Quality Control Manager to lead quality operations within a precision manufacturing environment — overseeing inspections, nonconformance investigations, CAPAs, MRBs, and quality systems.
Key Responsibilities:
Lead quality operations and inspection activities
Manage quality personnel and processes
Manage CAPA programs and lead MRB activities
Investigate nonconformances and support ISO compliance initiatives
Work directly with machinists and operators on the production floor
Review first article inspections and lead root cause investigations
Support internal and external audits
Drive continuous improvement initiatives
Required Qualifications:
Manufacturing quality experience required — must have production floor involvement
Leadership experience required
CAPA experience required (must have owned CAPA process)
MRB experience required
Nonconformance management experience required
Blueprint reading required
Inspection experience required
CNC machining background strongly preferred
Local to West Chester, PA — no relocation considered
Do NOT submit candidates with:
Regulatory-only quality background with no production floor involvement
Documentation-only quality experience
No machining or manufacturing exposure
No leadership experience
LOCAL to West Chester PA only — no exceptions, no relocation.
I look forward to hearing from you soon.
Does Costco hire directly, or does it use staffing agencies?
Need a remote job, apply below?
Looking for a remote job? Check out Jobcase, Indeed, and LinkedIn for a variety of opportunities that match your skills and experience. Good luck with your job search! #remotejobs #jobsearch #workfromhome
What is something you would tell your best friend about working for Alro Steel?
Alro Steel is a well-respected company that offers great career growth opportunities in the steel industry. If you're interested, go for it! And remember to check out reviews on sites like Glassdoor or Jobcase to get a better sense of what it's like to work there. Good luck with your decision!
How will I receive training if considered for this job?
Training for this job will likely be provided through a combination of on-the-job training, formal training programs, and workshops. Some companies also offer online training modules or mentorship programs. Make sure to ask about the specific training options available during the interview process. Additionally, resources like Jobcase, LinkedIn Learning, and industry-specific training platforms can supplement your training and help you excel in your new role.
What resume keywords should I use to land a Operations Analyst job?
To land an Operations Analyst job, be sure to include keywords such as data analysis, process improvement, project management, cost reduction, performance metrics, and system optimization in your resume. Tailor your resume to highlight your relevant skills and experience in these areas. Utilize job search platforms like Jobcase, LinkedIn, Indeed, and Glassdoor to find Operations Analyst job opportunities. Good luck! #jobsearch
Does anyone know what the interview process at East Montana Middle School is like? Yes i know my Dad work there Cruz Minjarez and I'm retired Industrial Engineer interested I do All Maintains in that field but only can work part time .
Since your dad works at East Montana Middle School, it might be helpful to ask him about the interview process specific to that school. In the meantime, you can also search for part-time maintenance positions at East Montana Middle School on Jobcase and other job search platforms like Indeed or Glassdoor. Best of luck with your job search!
Is it flexible to work at Texas Workforce Commission?
Working at the Texas Workforce Commission may provide certain levels of flexibility depending on the position and department you are applying for. It's recommended to review the specific job description and inquire about potential flexibility during the interview process. You may also explore flexible job opportunities on job search sites like Jobcase, Indeed, and FlexJobs.
How would I get training if considered for this opening?
You can look for training opportunities through online platforms like Jobcase, Coursera, Udemy, or LinkedIn Learning. Additionally, consider reaching out to the employer to inquire about any specific training programs they may offer for the role. Good luck!
What should I expect on my first day working as a Accounting Clerk?
Just trying to figure another route and options for me. Have been offered a job similar yo this.
I don’t think that’s me. But yes I had sent my resented